- Vineyard Equipment
- Trimmers & Pruners
- Used Machinery
Engine or linkage
Deutz engine (Phase IIIA)
6 x 6l cylinders
Delivers 167 hp at 2100 rpm
Anti-slipping TWINlock valves
AUTOspeed speed governor
Hydraulic reservoir capacity of 125l
Filtration on intake and return
Tilt correction of 600mm / 28%
380/85 R24 front tyres
480/70 R28 rear tyres
Driving and control
VISIOcenter driver cab
Air conditioned cab
Air sprung seat
VIEWpad colour terminal
CONTROLmaster lateral console
Job memory (hectares, hours, etc.)
SOFTfloat pendular suspension
14 shakers with aluminium clamps and rod holders, height-adjustable
2x22 sealing scales
Sealed length of 2600mm
Minimum harvesting height - 15cm
Conveyor width 320mm
Distance between conveyors of 650mm
Conveyor speed adjustable with inversion
Audible safety system on conveyors
Centralised greasing system
2 lower fans
2 vertical extractors
2 upper fans available as an option
Cleantech available as an option
Vario available as an option
Viniselect available as an option
2 x 1400l bins
2 x 1600l bins available as an option
Emptying from the rear
Emptying height of 2800mm
ARC Harvester Head with two supports allows high work rates
Upper and lower fans and the on-board Cleantech and Cleantech Vario sorting systems ensure excellent results
The G3.220 requires a minimum of maintenance.
Daily cleaning can be performed quickly thanks to the large space provided in the harvester head.
A large, secure platform allows daily maintenance of the machine to be carried out with ease.
Preparing your equipment for winter storage at the end of the season is very simple and inexpensive.
What sets the G3.220 apart is its efficiency under the most difficult conditions thanks to the high power wheel motors combined with the OVERboost transmission booster, which temporarily increases the drive torque. The hydraulic assistance circuit is supplied by a Load Sensing pump (automatic flow management) and guarantees the wheel motors receive constant pressure.
The G3 .220 is equipped with a compact, ergonomic control unit which integrates perfectly into your driver position. The TOUCHpad colour touch screen allows you to read all of the information at a glance and set the various parameters with great ease. The multifunction joystick groups together all of the controls needed to operate the machine. Automated systems, such as an end of row sequence or semi-automatic tilt management, ensure it is quick and easy to get to grips with.
The G3.220, thanks to its ARC harvester head with two shaker supports, allows you to harvest at high work rates. The hydraulic adjustment of the toe-in from the driver position ensures unrivalled harvest quality. 2200mm of sealing provided by the train of pneumatic sealing scales and two extra wide conveyor belts (320mm) ensure the vine is handled carefully, with no loss through dropping or crushing. The G3.220 is equipped with two lower aspirators. Upper aspirators and the on-board Cleantech and Cleantech Vario sorting systems simplify cleaning.
The G3.220 requires a minimum of maintenance. Daily cleaning can be performed quickly thanks to the large space provided in the harvester head. A large, secure platform allows daily maintenance of the machine to be carried out with ease. Preparing your equipment for winter storage at the end of the season is very simple and inexpensive. The G3.220 is part of a range of equipment produced by GREGOIRE.
Its hydraulic management is combined with an articulated drawbar on the 3-point linkage enabling it to be used with all types of tractor, even at low power, offering unrivalled handling. With variation in elevation of 700mm, Load Sensing transmission and automatic alignment on the row, you can easily adapt to even the most demanding terrains.