If versatility is a priority and you’re looking for a tractor with a low weight to power ratio that meets your exacting needs for productivity, the new 4E Series is the perfect answer for you, whatever the task.
With a wide choice of models, engines and equipment variants, the 4E Series is totally configurable to your needs.
Deutz-Fahr 4E Series tractors are powered by liquid cooled 3 or 4 cylinder turbocharged and intercooled engines with HRT and exhaust gas recirculation systems ensuring compliance with Stage 3A standards. These tractors are an ideal combination of sturdy construction and simplicity. The 4080E models are equipped with an electronic engine governor system which automatically determines the exact quantity of fuel needed in relation to power demand and load in real time to optimise fuel consumption.
The Deutz 4E Series tractors are equipped with a transmission offering the ideal ratio for every task.
The 30+15 configuration doing duty on all models except for the 4050E consists of a synchronised 5 speed gearbox with 3 work ranges and underdrive, the latter selected from a control integrated in the reverse shuttle lever.
A top speed of 30 Km/h for 2WD versions and 40 Km/h for 4WD versions makes road transport tasks quick and simple.
The hydrostatic steering system is fed by an independent pump for smooth, light steering even at low engine speeds. A steering angle of 55°, mechanical position, draft and mixed control modes for the rear lift let you work with total precision with any implement. A hydraulic oil flow rate of 42 l/min and 4 or 6* way distributors (*4080E model only) ensure accurate control and adjustment of all hydraulic implements. Depending on the model, the lift has a maximum load capacity of up to 3490 Kg (with supplementary external rams).
The 4E series transmission levers (gears and ranges) are on the right of the driver, while the mechanical reverse shuttle lever (which also includes the underdrive selector control) is situated under the steering wheel, for immediate, comfortable operation.
The cabin is spacious and comfortable. Designed specifically for maximum driver comfort, with solutions that drastically reduce vibration and noise.
| ENGINE |
SDF 1000 Series Tier 3 Diesel Engine |
| TRANSMISSION | 30/15 Synchromesh Gearbox Forward/Reverse Synchronized Shuttle Shuttle mounted on Steering Column Double Dry Heavy Duty 11” Clutch Gear Levers Located Right Hand Side Creep Gear Std Heavy Duty Rear Axle 4 Wheel Independent Braking Front Wheel Assist-Mechanical Front & Rear Diff Lock-Mechanical 40 km/h Road speed |
| PTO | Independent Rear PTO 540/ 750 Speed PTO 540 PTO @ 1967Rpm 540E PTO @1560 Rpm Ground Speed PTO 1”3/8 -6 Spline PTO shaft |
| WHEEL EQUIPMENT AND MISCELLANEOUS | Adjustable Radial Wheel Equipment 320/70R24 Front 420/85R30 Rear Front weight frame Dynamic steering fenders |
| HYDRAULIC/LINKAGE | Open Centre Hyd Pump System 42 l/min Hyd Pump Separate 17 L/min Steering Pump 3 Sets of Remotes Spring/Detent on 2 sets / 1 Set Float Mechanical Three Point Linkage EASYLIFT raise and lower switch Position & draft control Settings Cat 2 Ball ends 3500kg lift capacity |
| OPERATOR ENVIRONMENT | 2 Post ROP Frame Flat Floor ISO Mounted Platform Rubber Floor Mat Ergonomic Controls Telescopic and Tilting Steering Wheel Analogue Dash Deluxe PVC Mechanical Seat Sun Canopy Telescopic Mirrors 1 Rear Work lights 2 Bonnet Work lights Rotating Beacon |
| WEIGHTS & DIMENSIONS | Wheelbase 2106mm Overall Length 3990mm Total Weight 3250kg |
CATALOGUES
GALLERY
SPARE PARTS